不同管道合理有序安裝是保證整個工程作業正常完成的基礎，所以在設計時就一定要協調好，同時要保證通風管道的質量要過硬，工程結束再去維修會非常的麻煩。

　　Different pipe installation is reasonable and orderly basis to ensure the normal operation of the entire project completed, so when the design must be coordinated at the same time, to ensure the quality of ventilation pipe to be perfect, go to the end of the project will be very troublesome maintenance.

　　近幾年來通風管道發展迅速，很多行業都需要不同類型的的通風管道。對于通風管道而言一般來說除了要求其質量的同時，在安裝過程中也要注意幾點，這樣才能大化的利用好通風管道，也能降低風險，提高生產的性。

　　In recent years, ventilation ducts have developed rapidly, and many industries require different types of ventilation ducts. The ventilation pipeline in general in addition to the requirements of its quality at the same time, during the installation process should pay attention to several points, good ventilation pipe so as to maximize the utilization, can also reduce the risk, improve the production safety.

　　那么通風管道安裝需要注意哪幾個方面呢?

　　So, what are some aspects of ventilation pipe installation?

　　1、施工前總工程師應將各工種的管線幾種畫在一張平面圖上，并用不同彩色筆標記。在各交點處綜合標高，檢查是否有否有矛盾之處，及時發現并解決。

　　1. Before construction, the chief engineer shall draw several lines of each type of work on a plan and mark them with different colored pens. The comprehensive elevation at each intersection shall be checked to see if there are any inconsistencies and timely detection and settlement.

　　2、為了減少投資，節省空間，降低層高，有些鋪設無坡度要求的管道。

　　2, in order to reduce investment, save space, reduce height, and some laying no slope requirements of the pipeline.

　　3、在建筑設計中，不同的工種要協調好空間的分隔，給水排水等，要提前核算好每種管道的標高范圍，在施工的時候不要超過這個界限。

　　3, in the architectural design, different types of work to coordinate the space division, water supply and drainage, etc., to advance the calculation of each kind of pipe elevation range, in construction, do not exceed this limit.

　　4、如果管道之間遇到相碰的情況，那么要遵循小管讓大管，有壓讓無壓。

　　4, if the situation encountered between pipeline collision, then follow the tubular pressure to let the bassoon, no pressure.

　　本文的精彩內容來自山東通風管道加工詳細內容請點擊我們的網站:http://www.tianhaichuan.com/謝謝您的到來!

　　The highlights of this article are from the Shandong ventilation pipe processing details, please click on our official website: http://www.tianhaichuan.com/, thank you for coming!

上一篇：油煙凈化器送風系統再設計上的優勢
下一篇：為什么要把濟南排煙罩做成錐形體