通風管道是中空的用于通風的管材，多為圓形或方形。山東通風管道加工對以后風管的使用有很大的影響，也為了操作人員的，所以了解清楚通風管道的加工安裝注意事項十分必要，小編特整理了相關資料分享給大家，尤其是通風管道的詳細特色包含內容。

The ventilation pipe is a hollow pipe used for ventilation, mostly round or square. The processing of Shandong ventilation ducts has a great impact on the use of air ducts in the future, and also for the safety of operators, so it is necessary to understand the precautions for the processing and installation of ventilation ducts. I have compiled relevant data to share with you, especially the detailed features of ventilation ducts.

通風管道如今現已融入到各個場所傍邊，成為社會工作日子傍邊無法或缺的一部分，有了通風管道設備，在空調通風系統等方面，都有了很大的提升。那么通風管道有何詳細特色呢?

The ventilation duct has now been integrated into various places, becoming an indispensable part of social work days. With the ventilation duct equipment, the air conditioning and ventilation system has been greatly improved. What are the detailed features of ventilation ducts?

一、造價低：通風管道與傳統磚砌通風道比，能節約工程造價;

1、 Low cost: Compared with the traditional brick ventilation duct, the ventilation duct can save the project cost;

二、質量輕和強度高：與傳統磚砌通風道比，菱鎂通風道自重輕、強度高，能大幅度下降建筑物的承受荷載;

2、 Light weight and high strength: Compared with traditional brick ventilation duct, magnesite ventilation duct has light weight and high strength, which can greatly reduce the bearing load of buildings;

三、規劃靈活：通風管道可根據預留洞的巨細，隨時調整管道的標準尺度;

3、 Flexible planning: the standard size of the ventilation pipe can be adjusted at any time according to the size of the reserved hole;

四、規劃獨特：通風管道的開口上安裝了煙氣止回閥和防火阻隔門，能夠防止串味和串火。

4、 Unique planning: smoke check valve and fire barrier door are installed on the opening of the ventilation pipe, which can prevent cross smell and cross fire.

如果是彩色涂層鋼板通風管道的話，應該保持內壁是光滑的，而且通風管道加工的過程中，還不能將涂層損壞，若是出現損壞的部位，需要用環氧樹脂涂刷在表面即可。另外通風管道加工的過程中，還要做好防腐蝕措施，不能使用抽芯鉚釘，而且在通風管道零件裝配的時候，這些零件都要經過鍍鋅處理才行。

If it is a color coated steel plate ventilation duct, the inner wall should be kept smooth, and the coating should not be damaged during the processing of the ventilation duct. In case of damaged parts, epoxy resin should be applied to the surface. In addition, anti-corrosion measures shall be taken during the processing of the ventilation pipe, and pop rivets shall not be used. In addition, these parts shall be galvanized during the assembly of the ventilation pipe parts.

這就是今天凈化的小編為您帶來的資訊，如果你還想知道更多相關內容，就來我們網站http://www.tianhaichuan.com進行咨詢了解吧！

This is the information brought to you by today's purified compilation. If you want to know more about it, please come to our website http://www.tianhaichuan.com Consult and understand!